| GARMENT CHEST | GARMENT WAIST | GARMENT SLEEVE | GARMENT SHOULDER | GARMENT LENGTH | |
| 34 | 18.6 | 17.6 | 23.8 | 17.3 | 30.3 |
| 36 | 19.4 | 18.4 | 24.2 | 17.7 | 30.7 |
| 38 | 20.2 | 19.2 | 24.6 | 18.1 | 31.1 |
| 40 | 21 | 20 | 25 | 18.5 | 31.5 |
| 42 | 21.8 | 20.8 | 25.4 | 18.9 | 31.9 |
| 44 | 22.6 | 21.6 | 25.8 | 19.3 | 32.3 |
| 46 | 23.4 | 22.4 | 26.2 | 19.7 | 32.7 |
PLEASE NOTE THE MEASUREMENTS ARE WIDTH NOT CIRCUMFERENCE.
Chest width: Measure from the bottom of one armhole across the chest to the bottom of the opposite armhole
Waist width: Place the measuring tape where the natural waist would fall, usually a bit lower than halfway down the blazer, and measure from one side of the jacket across to the other.
Shoulder to sleeve: Measure from the tip of the shoulder down to the bottom of the sleeve
Shoulder to shoulder: Place the measuring tape at the corner of one shoulder and pull across to the other shoulder. This is an important measurement as some people typically wear the same size but have different shoulder widths.
Front length: Place the measuring tape in the middle of the collar and pull it down vertically to the bottom of the jacket.
Additional Measurements:
- Collar to shoulder: Place the measuring tape at the middle of the collar and pull down to the tip of the shoulder
- Upper arm width: Place the measuring tape in the middle of the upper arm and measure from one side of the sleeve to the other.This measurement is important when it comes to bicep size.
- Forearm width: Place the measuring tape in the middle of the forearm and measure from one side of the sleeve across to the other.
- Hip width: Measure from one of the bottom corners of the jacket across to the other.
- Sleeve hole width: Measure the width of the sleeve by placing the measuring tape at one corner of the sleeve hold and pulling it across to the other side.
Lift your arms slightly and measure around your body, crossing over the fullest part of your chest.
Measure around your waist at the narrowest point.
Stand with your heels together and measure around the fullest part of your hips.
Measure a similar style of well-fitting pants from the crotch/rise seam along the inside leg to the hem.
Using a measuring tape, measure the width of your shoulders from the back of your body (from shoulder blade to shoulder blade).
